Yellow Peril 1 | | Yellow Peril 2 | | Yellow Peril 4 | | Yellow Peril 5 | | Yellow Peril 6 | | Yellow Peril 7 | | Gallery Page

 
This Page Sponsored by

	

There is nothing magical about this, all the work was done with a 12" & 6" hacksaws and a couple of sharp files, a bench vice and a lot of care !

2 slots on the maximum dia of the 28mm carbs bell mouth

Close up of the finished brass plate note that the curves either side are equal.

Looking straight down the throat of the carb with the plate in place

Looking down on the plate notice how close it is to the slide and follows it's contour

Looking up at the plate notice it follows the bell mouth contour

To see an explanation as to how this simple gadget smoothes out your power delivery at small throttle openings see Mark Dent's excellent page at:- Mark's Carb page

For further details E-Mail: KGB-Racing at Saltmine dot Org dot UK

©    Geo of K.G.B. of T & T. |